1、 Impact of moisture on the machine room

The environmental humidity inside the machine room has a great impact on the communication equipment. The humid air is likely to cause corrosion of metal parts and plug-in tube parts of the equipment, and reduce the insulation of plates, connectors and wiring. If the humidity is too high, there will be condensation, which will make the components damp and deteriorate, and make the contact performance of the electrical contacts worse, or even rust. In serious cases, it will cause short circuit of the power system and electronic components. Generally speaking, the relative humidity in the machine room is kept within the range of 40% - 60%. To maintain the humidity and ensure the normal operation of the communication equipment in the machine room, the best way is to use a dehumidifier to quickly and effectively eliminate the moisture in the air and maintain the indoor humidity of the environment.

2、 Dehumidification solution

The temperature and humidity inside the communication machine room are very high. The optimal humidity should be kept within 40% - 60%. If the humidity is too high, the components will be affected and eventually cause a short circuit; If the humidity is too low, the mechanical friction part will generate static interference, damage components, and affect the normal operation of the equipment. The environmental humidity in the communication room needs a special dehumidifier to control its humidity. Dehumidifier equipment shall be selected after professional calculation according to its working conditions.

Industrial dehumidifiers are a series of dehumidifiers specially designed for various communication machine rooms and machine room equipment industries, including conventional type, temperature regulating type, hoisting type, pipeline type, wall mounted type and other types, which can be used according to different environments. It can prevent components in the machine room from being damped and rusted, short circuit of power supply system and electronic components, and the failure of equipment in the machine room to operate normally is a manifestation of dampness and even damage the equipment in the machine room.