The ceiling dehumidifier is a dehumidification equipment that many manufacturers need to use. Why? Due to poor ventilation in many factories, the indoor humidity is high. At this time, various areas in the factory also have various equipment, and ordinary dehumidifiers take up more space. At this time, the characteristics of suspended ceiling dehumidifiers are highlighted, as those suspended from the top do not take up space.

1. The ceiling dehumidifier should be placed on a table with a certain distance from the wall, and the table should be flat. Screws should be used to fix each connection.
2. The suspended ceiling dehumidifier is assembled on site using conveying components, and the unit itself has a high foot 100mm channel, which is usually divided into stages. ZK60A is larger than the unit.

When installing a suspended ceiling dehumidifier, it is necessary to first take out the manual and check it with each component to ensure that there are no quality issues with each component; And check if other rotating components such as air valves and fans can rotate normally.

4. Reserve around the cooling section for condensate discharge, and set up a water seal bend at the condensate outlet with a height of 50-100mm.

During the installation process, apply sealant (or other fillers) to the connections of the frame to prevent air leakage.

6. The inlet and outlet pipes must be equipped with flow regulating valves outside the unit to cut off the cold (hot) water source during maintenance.